Archive for the ‘Automotive’ Category

Brake Service

Thursday, December 4th, 2008
Automotive Services
David H. Urmann asked:


Brake Services are a must in ensuring safety of automobiles especially its passengers.

Vehicular accidents are a leading cause of death in many countries around the globe. Such can be attributed to various reasons; however, majority of the cases is due to poor maintenance of the vehicle. More particularly, brake systems often fail to serve its main purpose because those behind the wheel forgot to check them before actually traveling. As a responsible owner and driver, you must always put into thought that it is not only you who will be suffering from severe damages, but your passengers as well. Especially if you run a business that involves automobiles, heavy machineries or one that offers transportation service to the general public, safety should be your number one priority.

Depending on the type of vehicle you own, there are several brake systems that works for each kind. Before visiting the nearest auto shop, identifying what system is installed in your car would help you scout for the most appropriate brake service. In addition, determining this fact will lead to you establishments which can provide you with necessary tools and technical know-how for you to maintain the quality of your brake system. All drivers depend on the braking system in their vehicles as this is crucial to the law of survival. Aside from knowing what kind of system is in your car, familiarity with what actually compromise the machinery is a requirement. This shall enable a driver to troubleshoot simple mechanical problems that may arise while on the road.

Technological advancement has given us a wider range of automobiles to choose from. Therefore, the development of various types of brake systems was inevitable to keep up with the fast-changing demands of each vehicle type. Among the many available in the market, the most commonly used for high-powered, heavy equipments are the hydraulic brake mechanism and the air brake system. From the word itself hydraulic brakes makes use of hydraulic brake fluids forced into particular pistons which then are expected to reach cylinders connected to the wheels. Similar components in this kind of contraption must likewise be inspected for damages other than the normal ones you encounter. On the other hand, the air brake system operates with compressed air found in pistons within master cylinders. Programmed systems were later incorporated in the regular air brake mechanisms since damage to car parts became a reason for vehicular accidents during the time when air brake systems were kept under control by train engineers.

If you were in the transport business, having a well-maintained automotive brake system would suggest safety and security of services to your clientele. Hence, the returns should be better compared to competitors in the industry. A regular visit to your choice of dealer is a must if you’d like to save on your hard-earned money. Especially if you operate heavy machineries, only the best brake system dealers are to be considered. However, finding one on a short notice is quite difficult as most of these companies encourage scheduled check-up of vehicles. So unless you are willing to compromise on this rule, you better make sure that your brake system parts are working just as they should be. For repairs and other services, ask friends and family for their recommendations. They should be able to give you at least one particular dealer which provides the service you need. Otherwise, surf the net for some but be careful because almost, if not all, claim to be the best at what they do. Consider also your location, schedule and of course, your budget. Whenever replacing parts of your brake system, it is best to go for performance rather than cost. Majority will generally look for cheaper parts versus more expensive ones but in turn they are sacrificing the level of safety of their vehicles.



Ashley

J.m. Group Enterprises Launches Automotive Airbag-only Website

Monday, November 17th, 2008
Automotive Services
Jeff Mcgee asked:


This new website owned by J.M. Group enterprises will give consumers searching for Automotive Airbags and services the ability to search the internet and buy a set of replacement airbags without paying expensive dealership prices. . Consumers can expect to save up to 75% off the auto dealership’s list price. Only Airbag related search results and sponsored links will be displayed.

“Now, when someone is searching for a set of Ford Focus Airbags all of the links and results displayed will actually be related to that specific vehicle,” said Jeff McGee, Owner of Safety airbags INC. “No longer will auto part buyers have to browse through generic sponsors and over priced dealerships to find the airbag price they’re looking for.”

The Ford Airbags website functions like any other web search tool, in that users simply type in the airbag related keywords or phrases and click the “search” button. The difference is in the Ford Airbags results returned, due to targeted indexing of websites. Search engines use “bots” and crawlers to index the contents of websites; the website only indexes auto airbags with automotive-related content and will only include sponsors and advertisers who offer automotive products and services.

“The creation of this airbag locator website was a natural outgrowth of our targeted marketing plan,” explained Mr. McGee. “We understand that Used Airbags buyers are often seeking very specific safety airbags, and Ford Airbags.Com is another tool to ease and expedite that process. This website was Launched in July 2007, Safety Airbags is an online auto parts website site featuring used and new replacement airbags and Airbag Computers. The site was created with the sole focus of catering to auto airbag buyers and the collision industry. This site offers full-featured online replacement airbags, diagnostic modules, sensors and safety seat belts.



Kelly

Automotive Scan Tools — What Are They?

Sunday, November 16th, 2008
Automotive Services
Tom Tessin asked:


Over past few years, the most expert auto shops & garages now need choice of automotive scan utensils which carry out everyday diagnostic work to pinpoint any of the problems with engine or else engine management system to find out what action is required to effect repair with minimum of error & maximum competence.

There are various different tools obtainable to perform diagnostics & scans on different kinds of car & to prepare and repair as efficiently as likely. Knowing in much detail what type of issues are causing car engine to act in particular manner is a key to correct fault in timely & effective manner.

Perhaps best-known maker of scan tools is OTC that will make range of tools intended for the main quality & best price. The comprehensive variety is obtainable to allow mechanics to tackle any of the job they find, and range of the OTC automotive tools is familiar as top options for professional, and being reasonable enough for the domestic use in certain situation.

Different jobs need different tools, & some are further more complex than the others. Normally, any job to fix modern car starts with plugging scanner in engine management PC & downloading log of present performance date. And this will include the fuel consumption, & time since last service. It can give mechanic complete impression of how engine is working, and where there is errors happening. The scan can show mechanic examining engine whether or not there are any troubles with fuel supply, electronics, air filters, and running temperature, also it can provide lots of insight in whether any troubles are related to the issue in engine itself, or really in a management system is set up.

When commercial automotive scan apparatus are costly to install & themselves need regular network updates that carry latest settings for all new vehicle released, and they pay immediately thanks to time as they can save, and reality that devoid of them, even most skilled mechanic will struggle to find out the inner workings of latest car engines that is designed to be proficient, and strong, but are more and more complex for anybody but experts to think carrying out any of the work on.

What Do You mean By a scan tool?

The scan tool is device that is used to line with car’s onboard systems and these systems are in control of engine and transmission, safety systems such as antilock brakes & traction control, or traveler convenience & comfort systems such as power windows, air conditioning, & entertainment systems. This is short list now, there are many systems incorporated in modern car, which are been controlled by some kind of computer unit but you get an idea.

Majority of the aftermarket scan tools might not access all these systems. No one will permit you to program any of the system. So, first question to inquire is ” what do I want to do with scan tool?” Hopefully by now, you’ll have a better understanding. If not, keep doing your research and the answers will come.



Jessica

Automotive Glass Giants to Merge

Friday, November 7th, 2008
Automotive Services
Glady Reign asked:


Two leading companies in the automotive glass and replacement industry is set to merge so as to create what could be the biggest and most influential company in the said industry. These two giants of the automotive glass industry are BELRON, the world’s leader in vehicle glass repair, and Safelite Group Inc. which is the US’ largest automotive glass replacement and repair company.

The Safelite reputation for being the only integrated provider of automotive glass insurance in the country will be acquired by BELRON. Safelite also boasts of retail fulfillment, an automotive glass manufacturing plant and a network of wholesale distributions. The planned merging of the two companies will be subjected to regulatory approval for it to take place.

Talks are still going on and the deal may be sealed on March this year. Once the deal is completed, operation of the new organization will immediately commence. The combination of BELRON Inc., the US arm of the BELRON Company, and Safelite will give birth to a company that will be named Belron US. “This acquisition is the early phase of an overarching plan to profitably grow market share in an industry teeming with potential,” Dan Wilson stated. Wilson is the president and chief executive officer of Safelite Group. The joining of the forces of the two leaders in the industry would greatly benefit not only the two companies but their customers as well.

“Growth will be organic and through additional strategic, targeted acquisitions. Safelite’s customers, business partners and staff will benefit from a parent company with a global focus on the automotive glass industry. Belron is passionate about sharing best practices globally and has profitable growth at the center of its US ambitions,” Wilson added further.

The partnership aims to take control 20 percent of the market. They are in such a position so as to make this a reality. Of course, it would not be that surprising since both companies are leaders on their field and the technologies employed by both companies will be combined. The combination of their potentials and their assets will benefit their buyers.

Belron already has 110 years of experience under its belt and their success is a testament to the company’s effort to raise the bar in the automotive glass industry. Gary Lubner, the group chief executive officer of Belron stated that the their company’s experience will help the partnership “provide more locations, increased capacity, and expanded service offerings to individual consumers as well as insurance, fleet, and commercial customers”. Indeed, the new company will cover the basic and the marginal demands of the industry much like a Volvo floor mat covers a car’s floor that well.

The partnership will greatly impact consumers positively. They will have an access not only to the 212 branches of Safelite but the merging will also add to that number the 90 branches of Belron in the US. Mobile service and repair vehicles will also be increased, Safelite has 2,200 of them and Belron will add to that with 500 of their own. The combination of their resources would mean that they would have wider service coverage all over the country, all of the 50 states will be considered in the expansion.

Aside from their consumer channel, Safelite also provides property and casualty claims management services under its subsidiary, Safelite Solutions. Another arm of Safelite is their service operation which is a national provider of complete automotive glass products. The service operation also installs and repairs materials and tools as well as replacing them. They have a wide network of warehouses in the United States composed of 81 depots across the country.



Micheal

Car Dealer Financing Deals in the United States, Including Audi Dealer Oakland, and Their Services

Wednesday, November 5th, 2008
Automotive Services
Trevor Mulholland asked:


There are 50,000 automobile and truck dealers in the United States, including Audi dealer Oakland in California, Ford dealerships in Alabama and other major car brands around the United States. Their combined sales amount to approximately $770 billion and the biggest dealers are Sonic Automotive, AutoNation, Group 1 Automotive and United Auto Group.

The top 100 dealerships in the U.S. account for less than 15 percent of total industry sales. There are 25,000 new automobile dealers, including Audi dealer Oakland, with total sales of $700 billion and approximately 25,000 used automobile dealers with total sales of $70 billion. An automobile dealership usually makes around $30 million a year, with about 500 car dealers in the U.S. ranging around $100 million of revenue annually.

The profitability of a car dealership is mainly dependent on the volume of automobiles and services sold, and the demand for automobiles is mostly affected by interest rates and consumer income, because most automobiles bought have to be financed. There are several factors that determine the interest rate that a consumer can avail of for a car loan. These are: the finance company, the automobile to be purchased, the length of the loan term and the consumer’s credit rating.

The consumer can avail of a car loan from a bank, a credit union, or the financing arm of the car manufacturer. The car dealer can also provide the loan and other financing options. Interest rates for buying a new automobile are lower than those offered for purchasing a used car. With regards to loan term length in general, longer terms have higher interest rates. Also, consumers with higher credit ratings are more likely to be offered lower interest rates. It is estimated that only 15 percent of automobile buyers in the U.S. qualify for zero percent loans offered by car manufacturers.

Meanwhile, car dealers can also offer insurance to their customers. Guaranteed Auto Protection or GAP insurance is offered to protect loans in case the car is lost because of theft or an accident. Credit life insurance and disability insurance policies can also be offered by the car dealership. Disability insurance can protect the loan in case the borrower is unable to work during the loan term, while credit life insurance covers the remaining balance of a loan in case the borrower dies.

Car dealerships can also offer aftermarket accessories which are not directly offered by the automobile manufacturer. Many dealerships also have their own service shops. The car buyer can avail of the services of these shops through pre-paid maintenance agreements. However, because of the broad differences in programs that are offered from dealership to dealership, say, with seller like Audi dealer Oakland offering services and materials different from those available at Ford or Mercedes, it is essential for the consumer to know what gets covered under such a plan and what the suggested service intervals are.



Nicholas

Working With Blown Automotive Fuses

Sunday, October 26th, 2008
Automotive Services
Jayesh Bagde asked:


Repairing blown automotive fuses requires substantial knowledge about its placement and how it works.

Automobile fuses come in a type of glass formation. It is cylindrical in shape while the ends are stainless steel and made of glass at the center. Others are made of plastic. It also has links acting as a backup fuse.

Below are some types of automotive fuses:

• Mini (for small-current applications)

• Standard (common circuits)

• And Maxi (for higher-current applications)

These are the three types used in today’s vehicles. The fast-acting fuses are the standard and mini because it protects the vehicle circuitry. This would go with the vehicle’s lights and radio wires.

Maxi fuses are slow-acting fuses with large current draws found in rear window defoggers, anti-lock brakes and traction controls. Cartridge types of fuses are used in older vehicles. This is while blade style fuses have become the standard fuse application nowadays.

Thorough Fuse Checking

Every user manual contains a help guide discussing systematic instructions. Using these manuals enables the car owner to locate the fuse since it can be under the dashboard or beneath the side kick panels. It also helps in immediately detecting problems.

A non-functional fuse should be removed from the box using your hands. This should be done especially if you’re checking for blown or burnt fuses. A blown fuse has a separated metal coil that needs to be replaced.

Fuse Replacement

It only takes five minutes and a dollar to replace fuses. After locating the fuse, remove its cover and find the locator sticker. There are many fuse covers that has an extra fuse and pullers on it. If confused, a manual would be of great help. Most of it has diagrams for the fuse panel corresponding to the fuse lining.

Next, look for the amperage rating of the blown fuse. Most of these would be color coded. Different ampere ratings may damage the equipment again. After this, remove the non-functional fuse with the use of a puller or needle-nose pliers.

The next step is to hold the fuse up where the burnt area is located. The fuse is good when there is a fine wire connecting the two sides. It is bad when one section of the wire is burnt. Auto shops provide an array of different fuses.

Replace fuses with ones that have the specified ampere rating. A smaller fuse, particularly in a size smaller than the former, can be installed until a new replacement has been bought. Usually, carmakers use a resettable fuse type for circuit breakers. These are unlike replaceable circuit protectors. Examples of where these fuses are used include headlights, power windows and seats.

If the fuse blows after replacing another one, circuitry is the problem. Replacing fuses is easy to do on your own but make sure you make an appointment with the dealer or service station so as to have it repaired for more serious problems.

Tips on maintaining fuses

Always refer to the vehicle’s manual for fuse capacities in order to prevent malfunctions. New electrical systems on vehicles have more than one fuse panel situated in different locations. Carmakers have a labeled fuse access panel, having “FUSES” for an easier diagnosis. Some of its components also have built-in circuit breakers. However, tripped circuits usually give out more serious problems like the use of more current.

Good maintenance and handling of automotive fuses also require hassle-free auto configuring probabilities. Preventing serious problems is the key to good mechanical and electrical efficiency of a vehicle. Owners can buy auto fuses at retailers, especially at reputable online electrical providers. You need to choose one who has a wide range of inventory selections as well as the best value and return policies.

Automotive fuses are designed to protect circuits from electrical overload. It is the main part of the electronic system, preventing fires and burns. If the wires are burnt, the auto will stop functioning.

Different types have their own capacities. Manufacturers tend to cut it into different lengths for greater accessibility. The fuse box is located under the cabinet or the steering wheel for easy management of malfunctioning cases. Some changes that might take place when problems arise include times when the lights go off and the radio stops working.



Bernard

Auto Repair: Choosing the Right Automotive Replacement Parts for your Vehicle

Tuesday, October 21st, 2008
Automotive Services
Tony DiFiore, Jr. asked:


For most laymen, having a vehicle repaired involves several elements of risk. Are you getting a fair deal? Could there be a cheaper solution? Is your car going to be okay? Acquiring a little bit of basic knowledge before taking your car in for repair can help to put these kinds of questions at ease. From obtaining an estimate to getting the best automotive replacement parts, here are a few tips to help you get the most from your car repair.

1. Understanding Automotive Replacement Parts – OEM vs. Aftermarket

O.E.M. stands for Original Equipment Manufactured, and refers to vehicle parts that are made by a car manufacturer itself. I.e., Toyota OEM parts are made by Toyota, and so on. You may also hear the terms O.E.S. and OE; which mean Original Equipment Supplied and Original Equipment, respectively. While many times the terms OEM and OES are interchangeable, OE is a term more generally referring to any original equipment on the car. Some of OE car parts and components are not actually made by the car manufacturer, but are purchased and assembled by the automakers.

After Market auto parts are bought and added to a vehicle at the dealership or after the vehicle left the dealership, and are not made by car manufacturers. Aftermarket parts are most often used as automotive replacement parts, but can also function as specialty add-ons to increase both look and performance.

Original Equipment is often times more durable as compared to stock parts, but can come with a substantial markup to cover the labor and shipping costs of the manufacturer. However, there are many auto shops that offer affordable, yet well-made ‘to automotive standard’ parts such as www.partsplusautostore.com. To assess which type of automotive replacement part will be the best for your repair, consult with the mechanic after initial inspection. Knowing the type and degree of damage to a part can help to determine a clear discourse.

2. Receiving an Estimate

Below are four tips to help you get the most for your money:

o If you know the types of repairs needed, make a list before you arrive. The repair shop can then inspect your car and estimate repairs more efficiently.

o Make sure you obtain a written or verbal estimate for repairs; the final bill cannot exceed more than 5% of the original estimate, as required by law.

o Always ask to see the damaged or worn part and ask that it be returned to you in the box of the new replacement part at the time you sign the work order. After inspection, have the repair garage dispose of parts as needed or retain for further inspection.

o Request quotes from several sources, including your dealer. While replacement parts from your dealership will usually be a bit more expensive, it helps to receive a quote from as many sources as possible to avoid getting duped by the ‘low ball bid.’ Some repair shops under bid to get you in the door, only to add on unneeded services later.

3. A word about new vehicles

In a few unfortunate cases, a new vehicle that seemed to have driven off the lot in good condition ends up needing repair. If the dealership is not as helpful as they should be, you can contact the manufacturer of the vehicle. Major manufacturers have a customer help line that will connect you with a representative who can help to get the needed parts and repairs done quickly. Because most dealerships are independently owned, it’s difficult to assess which will be responsive and which will not. Contacting a manufacturer’s representative will help you get the leverage you need to resolve the problem promptly.



Ron

Automotive Ads Profit the Internet

Monday, October 20th, 2008
Automotive Services
Evander Klum asked:


In this new era, the high tech age, media has been so powerful since it is one of those who benefited from the innovations.

Media’s aim is to inform and mediate. Forms of media include the print (magazines, books, tabloids, broad sheets, journals, etc.), the audio (radios) and the audio visual (television, movie tapes, etc.).

Nowadays, the most evolving form of media is the internet. It is currently the most accessible one. With just few clicks, what ever you need is right in front of you. And just like any other forms, the internet also acquires profit when its services are used. The only difference is that it acquires more than any other forms of media.

Selling is one of the dominant features of media. In the case of the automotive industry, it is used to not just to inform the public on the latest cars but also to sell cars and parts like the Dodge aftermarket parts .

The most time and space consuming in media are the ads. But because of this, the internet profits a lot from automotive ads.

The Center for Media Research announced that based on a latest report from Borrell Associates, automotive ad spending this year will reach $31 billion. However, for the next five years, total ad dollars will grow only 1.7 percent as compared to a growth rate of 3.7 percent yearly during the last five years. The automotive industry’s online spending for this year will reach $2.8 billion. This is 7.6% of all automotive advertising and this represents a 13 percent annual growth rate.

According to the report, online car marketing will reach $4 billion by 2010. This, in effect, will become the second most-used medium for automotive advertisers, exceeding newspapers, cable, radio and direct mail and trailing only broadcast TV. During the same period, a 20 percent decrease on appropriations for offline auto ads in newspapers, direct mail and directories will be experienced.

For the first time, this year at the local ad level, online will become the lead marketing channel for used-car marketers. And for the first time, online will surpass newspaper. The automotive industry is spending a 7.6 percent total online ad budget; whereas, 20 percent of their spending to the online channel is appropriated by used-car dealers.

The report further said that this year, 29 percent will be the spending of their online ad budget on online video and paid search. But by 2012, it will increase that proportion to 76 percent of online marketing. As a lead-generation tool, the email also rank but banners and other display ads will decline.

Most shoppers are doing their early research online through going directly to the manufacturers’ Web sites rather than to third parties such as other companies. With this, it shows that the car sellers cannot effectively reach the public through the internet. Nonetheless, eventually, with the fast growing evolution of technology, surely the sellers will always make a move to effectively sell their products. After all, as technology changes, everyone adapts to it. And the automotive industry is one of those which can easily adapt. The various top of the line vehicle innovations are mere manifestations.



Julia

An Overview of Essential Automotive Tools

Saturday, September 6th, 2008
Automotive Services
Peter Garant asked:


There are several types of automotive tools available, and if you are in the business of fixing cards, or just want to make sure that you have the utilities necessary to keep your car in shape, you need to know which are the most important.

It should be emphasized that there is no such thing as an all in one automotive tool; in almost all cases, every potential problem can be fixed by a particular tool.

Replacing Car Parts.

With the Internet it has become easier than ever to find the parts necessary to replace a defective part. Of course, if the particular part is complex, or if the vehicle is imported, it will take a while before it can be replaced, especially if it has to be shipped from another country.

Automotive Tool Kits

Of course, it is important that if there is something wrong with the car you should consult a qualified mechanic. However, for simpler problems that you can fix on your own, it pays to have a few handy tools with you.

These automotive tools are not that expensive; basically all you’ll need are wrenches, several types of screws, pliers, pocket knives, jumper cables, torque wrenches, spare fuses, battery terminal brush, road flares, gloves, flashlights duct tapes, a reflective vest, oil and some spare tires of course. Of course, do not forget the car jacks. Of course, other essentials are medical kits and cell phones.

If you are going out on a long trip, you just need a good sized bag to put all those tools in. Put them in the back of the trunk. Finally, you should remember that although these automotive tools are easy to find anywhere, you should purchase the best that your money can afford.

The same can be said if you are in the car or vehicle repair business. Do not scrimp on the quality of the tools, because whatever you save on the cost of the tools will come out when customers start complaining of inefficient or poor service.

Some more tools you may want to invest in are the following:

Fuel injector pulse testers / fuel injection probes: these are the utilities that are used to determine the state of the fuel in the vehicle. There are several fuel saver kits available, and these two utilities can help monitor their efficiency.

Brake bleeders / brake bleeder vacuums: few things are more important than the brakes of a car; before using brake bleeders, you need to make sure that they are of the proper size for the vehicle.

Suction cups: this nifty tool is utilized by car mechanics as a device to keep a door window in its place as they work on specific parts. Besides suction cups, other automotive tools that will be useful for repair work are locking strip tools and knives.

When it comes to cars, it’s always best to be prepared. You can have it checked out every time, but you can never tell when it will act up on your next cross country trip, so it’s best to have the essential automotive tools with you.



Caroline

Production Programs Granted to Cts Automotive Products

Monday, August 4th, 2008
Automotive Services
Glady Reign asked:


CTS Corporation, a leading developer and producer of electronic components and sensors announced that their Automotive Products department has received a host of production programs. The said production program is for CTS’s Seat Belt Tension Sensor which is a radical technology used in the safety belt assemblies that are employed by cars and light trucks in the North American market. The importance of the said sensor is vital for the protection of the occupants of a particular vehicle in the event of a crash. Production of the said device will start in the spring of this year. The produced device will be for use on cars to be released for the 2008 year model.

The company which will produce the sensor provides EMS or electronics manufacturing services to original equipment manufacturers in the automotive industry. These OEMs are also the same producers of high quality components like the Volvo strut assembly. The parts needed for the production of seat belt assemblies will amount to more than $13 million in sales. This amount will be the total output of CTS Automotive Products during the lifespan of the production programs. The company will produce all of the Seat Belt Tension Sensor in their assembly plant located in Elkhart, Indiana. Aside from this facility, the company also has production centers in Toronto, Canada; Glasgow, Scotland; Ostrava, Czech Republic; Matamoros, Mexico; Kaohsiung, Taiwan; and Dongguan, China.

The radical Seat Belt Tension Sensor is currently being employed on 39 different platforms. This number is expected to rise in the light of the production programs awarded to the company. The sensor is vital to the safety of the passenger in cases of accidents since it conveys signal to a vehicle’s Occupant Classification System. This onboard system classifies the front passenger side occupants, and from this data, the onboard computer can determine how to deploy the airbag. Correct determination of the seat’s occupants is important since different persons also have varying needs in the deployment of airbags. For example, a grownup can withstand airbag pressure greater than what a young person can handle.

This sensor also prevents the deployment of side and front airbags for the passenger seat when the said seat is empty. The sensor will also prevent airbag deployment when it detects a weight which is below a preset limit. These are not the only advantages of this sensor, in the production process; the sensor can be easily integrated to the seat belt assembly. Not only that, the sensor is made to be of high quality and is reliable. This reliability is important since any person knows that every safety features must work every time it is needed.

CTS is clearly happy with the way things are turning out for them. Tyler Buchanan, Senior Vice President for CTS Corporation said that “CTS is delighted to be awarded these programs”. He also added that “with these awards, CTS continues to demonstrate the value of this product to the marketplace for occupant safety”. The current trend which shows concern for vehicle safety when buying a car gives the company a chance to showcase what they can do in terms of developing and producing safety oriented features. The company’s customer responsiveness and expertise in large volume automotive packaging will come in play in the production of the Seat Belt Tension Sensors.

The continued interest of the motoring public for safe cars will surely make these production programs just the start of a new wave of production grants. Programs such as these are vital to meet the increasing demands for safety features.



Kathleen